When water enters the LED display inside, We should immediate measures should be taken to avoid damaging electronic components and affecting the normal operation of the display. Do you know what to do if the LED display screen cannot load images?
Here are some workarounds:
Cut off the power immediately: After discovering that water has entered the LED screen inside, you should first cut off the power supply immediately to avoid short circuit or other damage caused by contact between water and electronic components.
Disassemble the LED screen cabinet: If possible, disassemble the cabinet and back panel of the LED display for further inspection and treatment of the water inside.
Dry the water: Use a dry rag or absorbent paper towel to gently dry the water-infested part. Avoid using a hair dryer or hot air to dry as overheating may damage electronic components.
Drying treatment:Place the LED display screen in a well-ventilated place to dry naturally. Some hygroscopic agents or desiccants can be used to absorb moisture.
Use a moisture-proof bag: In a humid environment, using a moisture-proof bag or box can help reduce the impact of moisture on the display.
Check the circuit board and connectors: After the display is completely dry, check the circuit board and connectors for corrosion or damage. If so, replace or repair them in time.
Prevent water from entering again: Find out the cause of water entering the screen and take corresponding measures to prevent it from happening again. The display’s seal may need to be inspected and improved.
Seek professional repair: If you cannot solve it yourself or there is serious damage, you should seek professional LED display repair services. Professional maintenance personnel can inspect the display more comprehensively and make necessary repairs.
Please note that for large outdoor LED displays, it is best to have them handled by professional maintenance personnel to ensure safe operation and the integrity of the display. At the same time, when using LED displays, regular inspections and maintenance are required to ensure their normal operation and to prevent moisture and other factors from causing damage to the display.
Thank you for watching, We hope this solves your problem.
follow MaxcolorLED! Let you know more about LED display screen.